Glossary and frequently asked questions
From fibre optic cable to colocation connectivity: the key terms around fibre routes, networks and last-mile connections – and how Fibre-Hub helps you with them.
Cable and network
- Fibre optic cable
- A cable made of glass fibres that carries data as light signals – with very high bandwidth and over long distances. In German it is called LWL (Lichtwellenleiter). The fibre networks of the connected operators are the basis of every route check in Fibre-Hub.
- Fibre route
- A continuous fibre connection between two or more sites, often running across the networks of several operators. Fibre-Hub finds such routes across all connected networks – with route length, handover points and the number of operators involved.
- Route check / feasibility study
- Checking whether and how a fibre connection between sites is possible. In Fibre-Hub it takes seconds: the result shows route length, gaps, last-mile connection and the operators involved – as a map and as a PDF.
- Duct route
- The path along which fibre cables are laid – usually in protective ducts along roads, paths or railway lines. Route length is one of the key figures of a route check; new routes can be planned on the map in Fibre-Hub.
- Handover point
- The place where two networks meet and a route is handed over from one operator to the next. For routes across several networks, Fibre-Hub shows the handover points in the result.
- Splice closure and manhole
- In a splice closure, fibres are spliced, joined or branched off; the manhole gives access to the duct route underground. Both can be planned on the map and exported in Fibre-Hub.
- Empty duct
- An underground protective duct into which fibre cables are blown or pulled later. Existing empty ducts make a new route much cheaper because no new civil works are needed.
Dark fibre, wavelength, bandwidth
- Dark fibre
- Unlit fibre: the operator provides the bare fibre, and the customer chooses the transmission equipment and bandwidth. Dark fibre is in demand among carriers, data centres and companies with high data volumes. In which form a route is offered is set out by the network operators in their quote.
- Wavelength (lambda)
- A dedicated light channel on a lit fibre – with wavelength-division multiplexing (DWDM), many channels share one fibre. Where no fibre is free on a route, a wavelength may still be available: the extended search in Fibre-Hub includes such networks if operators have provided them.
- Bandwidth / Carrier Ethernet
- A lit connection with a guaranteed data rate, such as 1, 10 or 100 Gbit/s, operated by the network operator with its own equipment. Typical for site interconnection and leased lines.
- Leased line
- A permanently provided, exclusive connection between two sites – as dark fibre, wavelength or bandwidth. With Fibre-Hub you find the route and request it directly from the network operators involved.
Applications
- Site interconnection
- Connecting several sites of a company – plants, offices, warehouses – via dedicated fibre routes instead of the public internet. In Fibre-Hub you enter start and destination as an address, a point on the map or coordinates.
- Data centre connectivity
- The fibre connection of a data centre to customers, to other data centres or to internet exchanges – often via two separate paths. Fibre-Hub finds routes between any sites, including to and between data centres.
- Colocation connectivity
- Connecting your own equipment in a data centre's colocation space – for example in Frankfurt am Main – to your sites, to further data centres or to carriers. Fibre-Hub finds the route from the data centre to the destination across the networks of several operators.
- Mobile backhaul
- Connecting mobile sites to the mobile operator's core network. 5G needs fibre routes with high bandwidth – also at sites that have so far been connected by microwave.
- Redundancy / diverse route
- A second, physically separate path for the same connection, so that cable damage – for example from construction work – does not cause an outage. Diverse routes are standard for data centres and critical infrastructure.
- Backbone
- The core of a network: the high-capacity long-distance links between cities, data centres and hubs to which regional networks are connected.
Market and parties
- Carrier
- A telecommunications company that provides networks and connections to other companies and network operators. Carriers are among the typical requesters in Fibre-Hub – as are data centres, planning offices and businesses.
- Network operator
- A company with its own fibre network – from a municipal utility to a national provider. In Fibre-Hub, network operators upload their network data and are found without revealing their network plans: requesters only see the connection.
- Solution provider
- A company that delivers complete routes across several networks for its customers. In Fibre-Hub it receives the request for the whole route and assigns the sections as sub-requests to the network operators involved.
- Wholesale / open access
- Wholesale is the business between network operators and other providers; open access means a network is open to several service providers. Fibre-Hub makes such networks visible to new customer groups.
Construction and last mile
- Last mile / site connection
- The section from the existing network to the site, which usually requires new civil works. Fibre-Hub calculates the last mile along streets and paths throughout Germany – adjustable and without revealing the exact network entry point.
- Gap closure
- Where a piece is missing between two networks, the gap has to be built. Fibre-Hub shows gaps with their length – and indicates when a direct connection would be cheaper.
- Civil works
- The underground construction work for new routes: trenching, directional drilling or micro-trenching. Civil works are usually the largest cost of a new fibre route – the shorter the gaps and the last mile, the cheaper the connection.
- Wayleave
- The landowner's permission to run a line over or through their property. Where the last mile runs off roads and paths, Fibre-Hub points out that a wayleave is needed.
- Co-deployment and infrastructure sharing
- Under the German Telecommunications Act (TKG), fibre cables can be laid alongside other construction work and existing infrastructure such as empty ducts can be shared. Both reduce the cost of new routes.
Frequently asked questions
What is Fibre-Hub?
A platform where you find fibre routes between any sites across the networks of several operators and request them directly. Requesters, network operators and solution providers work together in one process – from route check to order.
Who is Fibre-Hub for?
For carriers, data centres, planning offices and companies looking for fibre connections; for network operators who want to make their network visible to new customer groups; and for solution providers who deliver complete routes across several networks.
Can I find dark fibre with Fibre-Hub?
You find the route and request it directly from the network operators involved. Whether it is offered as dark fibre, wavelength or bandwidth is stated in the operators' quote. If operators have provided networks with bandwidth or wavelengths, the extended search includes them as well.
Is Fibre-Hub suitable for data centre and colocation connectivity?
Yes. Start and destination can be any sites – an address, a point on the map or coordinates. This lets you check routes between data centres, from your colocation space to your sites or to mobile sites.
What does the result of a route check show?
Route length, gaps with their length, the last-mile connection to the network, the handover points and the number of operators involved – on the map and as a PDF for quotes, planning or coordination.
What if there is no continuous fibre route?
Then Fibre-Hub shows the gaps and the required last-mile sections and indicates when a direct connection would be cheaper. You see straight away how much would need to be built.
Can requesters see the operators' network?
No. Network plans are used only to plan connections and are never passed on to requesters. Requesters only see the connection of their route check – even the last mile does not reveal the exact entry point.
Which regions does Fibre-Hub cover?
Routes run across the networks of the connected operators. Fibre-Hub calculates the last mile to the network along streets and paths throughout Germany.
Where is my data processed?
In a data centre in Frankfurt am Main, with locally operated maps and address search and no external services. Personal data and project information are stored encrypted, and every login is secured with a second factor.
How do I get access?
Via “Request access” on the home page. Once you have confirmed your email address, our team will get in touch.
Check a route?
Apply for your Fibre-Hub account and check your fibre route in seconds.